Bionic AT-4 Pro
(%4,00 bank transfer discount)
Güvencesi
Installment Opportunity
Uskudar / Altunizade / Istanbul
One of its greatest features is that it can be used in all weather conditions thanks to the frequency waves it emits in the ground-penetrating frequency box and will be more effective in catching its target. When you attach the quad antennas, it is definitely a system that should be preferred for preliminary reconnaissance even in the most difficult weather conditions. It is a system that even those who use field scanners for the first time can use very easily, and with this type of use, it provides a clear understanding of the way to direct and bring to the target. Thanks to its 4-specially coated antennas, it can bring to the target.
Using the Bionic at-4 pro field scanning device ;
Bionic at pro has a dual system feature. BIONIC AT PRO is held in L shape and can be used by one person or two people. BIONIC AT-4 Pro consists of 2 frequency boxes. After the assembly process of the device is completed, a few minutes are waited. During this time, if the antennas do not move and show you the direction, they are changed. 4 different points are determined so that you can understand which of these points is the real center. The center where the real target is located is the place in the middle of these 4 points. After the antennas are assembled, the antennas are attached to the ends and the antenna tips are intertwined. The device is held parallel to the ground and at the level of the navel. A few minutes are waited. The important thing during the grip is not to leave the device too tight or too loose. The process is carried out by holding the antenna tips in a way that they constantly touch each other as if pushing them slightly.
Depth calculation with area scanning device BIONIC At-4;
With the bionic at-4 pro scanning device, we first mark the center of the ground where it is thought that there may be gold and a cavity to calculate the depth of an estimated 10 meters and a maximum of 18 meters, and we accept this point as the center and move on to other processes. We will use 2 chrome rods (approximately 15 cm long and 8” diameter hammer nails), up to 15 meters of cable, battery & 7 ampere power supply. We hammer one of the electrode rods into the center we detected. We hammer the second electrode rod 15 meters away. We send a current of 5-10 seconds. After waiting a few minutes, we take a 1m step from the center electrode to the outer electrode over the cable connected to the 2 electrode rods from the center to the outer electrode and wait a few seconds to calculate the depth. If the Bionic at-4 antennas of the scanning device cross during each wait, the estimated depth is 1 meter. If our antennas are not closed crosswise, we continue by repeating the same processes in steps 2 and 3.
